Magnifying glass finding a version tag inside a BIN file, illustrating checking a firmware version

How to Check the Firmware Version Inside a BIN File

Got a .bin file right now?

Open it free in your browser. See the real file type, hex, text and preview in seconds. Nothing is uploaded.

Open your BIN file

You have a firmware file called update.bin or fw.bin, and you need to know which version it is. Maybe the download page was unclear. Maybe you have several files and cannot remember which is newest. Maybe a support agent asked you which firmware you have.

You can check the firmware version inside a BIN file without installing it. In most cases it takes less than a minute. This guide shows you how, using free tools and no technical skills.

Why the version is hidden inside the file

Devices need to know what firmware they are about to install. So makers almost always store the version, the model and often the build date inside the firmware file itself. The device reads these before flashing and refuses files that do not match.

These details are usually saved as plain text. That means you can find them with a simple text search, even though the rest of the file is binary.

Method 1: Use the BIN file opener (easiest)

  1. Open our free BIN file opener in your browser.
  2. Drop in the firmware file. It is read on your device, not uploaded.
  3. Look at the type. Router firmware often shows “U-Boot firmware image”. Others may show “Unknown binary data”, which is normal for firmware.
  4. Click the “Text strings” tab.
  5. Set “Min. length” to 6 or 8.
  6. In the filter box, type ver. Look for lines like “V1.2.3”, “Version 4.0.12” or “ver 2.10”.
  7. Try other searches: build, release, a year like 2026, and your model number.

Most of the time, the version appears in the first few results. The offset on the left shows where in the file it lives.

Method 2: Read the firmware header

Many firmware files start with a header, a small block of fixed information. Some header formats put the name and version in a known spot.

U-Boot images

A very common format in routers and embedded Linux devices. It starts with the bytes 27 05 19 56. The 64-byte header holds a 32-byte image name starting at offset 0x20. That name often includes the model and version.

To read it, open the Hex view in our tool and look at the third row, offset 00000020. The ASCII column on the right shows the name as text.

Vendor headers

Many brands add their own header before the real firmware. It often contains the model ID, hardware version and firmware version as text near the start. Scroll the first few rows of the hex view and watch the ASCII column.

Method 3: Command-line tools

If you use a terminal, the built-in tools work well.

Mac and Linux

strings -n 6 firmware.bin | grep -i ver

This prints every readable string of six characters or more that contains “ver”. Swap “ver” for “build” or your model number to search for other details.

Windows

Windows does not include a strings tool, but PowerShell can search for text in a file:

Select-String -Path firmware.bin -Pattern "V[0-9]+\.[0-9]+" -AllMatches | Select-Object -First 10

This looks for patterns like V1.2 and shows the first matches. The output can be messy because of binary data, so the browser tool is usually easier.

What version strings look like

There is no single standard, so learn to recognize the common patterns:

  • V1.2.3 or v1.2.3: major, minor and patch numbers.
  • 1.2.3 Build 20260412: a version plus the build date in year, month, day order.
  • FW_1.02.05 or fw-1.2.5: a prefix for firmware.
  • R7000-V1.0.11.134: model name joined with the version.
  • 3.0.0.4.386_51255: long dotted versions with a build number, common in some brands.

If you see several versions in one file, the one near the start or next to the model name is usually the firmware version. Others may belong to parts inside, like the bootloader, the Linux kernel or a Wi-Fi driver.

Telling the main version apart from component versions

Firmware is often built from many parts, and each has its own version. For example, you might find:

  • U-Boot 2020.01: the bootloader version.
  • Linux version 5.4.55: the kernel version.
  • BusyBox v1.31.1: a tool bundle inside many devices.
  • OpenSSL 1.1.1: a security library.

None of these is the firmware version you see on the maker’s website. Look for the version near the model name or brand name. If you are unsure, compare with your device’s current version, shown in its settings page.

Compare with your device

To know if the file is an upgrade, you need your current version too. You can usually find it:

  • In the device’s web admin page, under Status or System.
  • In the maker’s phone app, under device info.
  • On TVs and printers, in the settings menu under About or Software.
  • On computers, in the BIOS setup screen for BIOS versions.

If the file’s version is higher, it is newer. If it is the same, you do not need to install it. If it is lower, it is a downgrade, which some devices block.

When you cannot find a version

Sometimes the strings tab shows nothing useful. Here is why, and what to do.

The firmware is encrypted

Check the entropy. If it is close to 8 out of 8 across the whole file, the firmware is encrypted or fully compressed. The text is hidden. Some makers still leave a small plain header at the start, so check the first few rows of the hex view.

The version is stored as numbers, not text

Some small devices store the version as raw bytes, like 01 02 03 for 1.2.3. You can only find these if you know the format. The maker’s documentation or a community forum for your device may explain it.

The file is inside an archive

If the tool says ZIP or GZIP, the real firmware is packed inside. Extract it first, then check the inner file. Our BIN file extractor guide shows how.

It is not firmware at all

If the tool says PDF, image or disc image, you have the wrong file. See what a BIN file is for the different types.

Use the file name and checksum too

Makers often put the version in the file name, like ArcherAX73v1_1.2.3_20260412.bin. But names can be changed by anyone, so always confirm with the strings inside.

A better proof is the checksum. Many download pages list an MD5 or SHA-256 value. Our tool shows the SHA-256 of your file. If it matches the one on the official page, you have the exact file the maker published, with that version. If it does not match, the file is different, even if the name looks right.

Keep a firmware log

If you manage several devices, a simple log saves time. Write down:

  • The device and its hardware version.
  • The firmware version you installed and the date.
  • The SHA-256 of the file you used.
  • Where you downloaded it.

Next time something breaks, you know exactly what changed. It also helps support teams help you faster.

A real example

Danish has three files in his downloads: fw.bin, fw(1).bin and fw(2).bin. All are for his home router. He drops each into our tool and searches the strings for “ver”.

  • fw.bin shows “V1.0.8 Build 20250310”.
  • fw(1).bin shows “V1.1.2 Build 20260105”.
  • fw(2).bin shows a different model name entirely.

His router’s status page says it runs V1.0.8. So fw(1).bin is the upgrade he needs. He deletes the other two, compares the SHA-256 with the maker’s site and installs the right one. The whole check took three minutes.

Frequently asked questions

Can I check a firmware version without installing it?

Yes. Open the file in our online BIN file viewer and search the text strings. Nothing is installed or uploaded.

Why are there several version numbers in my firmware?

Firmware contains many parts, each with its own version. The main firmware version usually sits next to the model name.

Is the version in the file name reliable?

It is a hint, not proof. Anyone can rename a file. Check the strings and the checksum.

What if the file is encrypted?

Look at the first bytes in the hex view for a plain header. If there is none, rely on the official download page and the checksum.

Does this work on my phone?

Yes. The tool runs in mobile browsers. See Android and iPhone guides.

Conclusion

Checking the firmware version inside a BIN file is quick. Open it in our free BIN file opener, search the strings for “ver” or “build” and look for the version next to the model name. Confirm with the checksum, compare with your device, and only then install. For the full picture on firmware, read firmware BIN files explained.

Similar Posts